Customization: | Available |
---|---|
After-sales Service: | After-Service Is Provided |
Warranty: | 12 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Other Specification | |
Conveyor system | The bottom surface touches the conveyor mesh during handling. There is no contamination and scratching of the material during the conveying process. The products are transported smoothly in the furnace without shaking and jamming. |
Temperature range | Max: 40 ºC -200 ºC, commonly used below 160 ºC, * temperature 200 ºC. |
Temperature uniformity | Temperature uniformity of not more than ± 3 ºC (except near the feed, discharge port), constant temperature stabilisation of the empty furnace left, middle and right three points through the furnace test, the start of the air supply motor are starting to send |
Heating device | The use of medium-wave quartz electric heaters, fast heating and drying firm. |
Air supply mode | Hot air blowing from top to bottom, special air circuit structure design, the temperature inside the box is uniform. |
Conveyor system | Adopting Tai Li speed reducer motor drive through the reducer, frequency converter, gear chain drive, composed of a complete transmission system. |
Temperature outside the machine | Below 45ºC. |
Control system | Siemens PLC system + Siemens touch screen can be connected to the MES system. |
Weight | Sbout 800Kg/m |
Power supply | AC380V 3Φ 50Hz 200KVA |
CDA | 10L/min 5.0~7.5kgf/cm² |